|
|
|
|
|
|
|
|
|
|
|
|
|
This handy snare support will get you up and running in absolutely unbelievable time! The #11 gauge wire is welded fast to 1/4" round stock. All you do is take your foot and step it into the ground. That's it. All that's left above the ground is about 10" of the 1/4" stock material so that it looks like another small limb. You have about 20" of 11 gauge wire to make your set. So simple, so fast, just step your support wire in, and the set is ready to hang.
|
When we were looking for a body grip support to handle and put on our website, we were amazed by the numerous supports available. With that being said, we wanted our trappers to be able to cover about any base with a removable body grip support, plus make it affordable. This support is so very unique that your trap can be set in the usual upright position, or you can keep that trigger system down in the water where it's not going to freeze or pick up surface junk every night. It comes in 3 different sizes, is a simple and straight forward system, and is rugged and ready for trap line use. I think you will agree that anything that maes or keeps you versatile in trapping is a plus.
|
This all stainless replacement trigger is the last rigger you will put on. Heavy duty and all stainless, including the hardware. Pretty simple, if you are going to replace your trigger, why not use stainless? No more rust, busting triggers, and ready for the whole season, not just part of it. These are the same as the Terminator Triggers.
$2.95 each
**OUT OF STOCK**
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Orange, plastic tail stripper.
|
This is a cotton glove with rubber dots all over the glove. This is also the glove I use for my dirt trapping. I like the feel I get with the cotton glove, and the dots give me the grip I need. I was mine in baking soda before the season, and let them hang out to air dry. Buy extras so you can change them out when a pair gets soiled. Rewash and reuse. I have been using the same gloves for years.
|
Bullseye triggers for 330/280 sized body grip traps. These triggers are made of heavy duty stainless wire (.104), and come complete with the hardware to replace your stock trigger. This "circle" trigger has a diameter of 6.5", however, it can be sized to your liking by opening or closing the circle. These wires will not rust, and will withstand years of use without breaking.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These are available in different sizes, all at the same price. 2 dozen covers.
#157 fits 1 1/2 style traps-rectagular
#175 fits 1 3/4 & #2 size traps-rectagular
#230 rectangle fits large #2 and #3 round and square jaw
#320 round fits #3
|
Odorless trapper wax.
1 lb. white wax=$3.50; black=$3.95
**ONLY BLACK AVAILABLE**
|
When we were looking for a body grip support to handle and put on our website, we were amazed by the numerous supports available. With that being said, we wanted our trappers to be able to cover about any base with a removable body grip support, plus make it affordable. This support is so very unique that your trap can be set in the usual upright position, or you can keep that trigger system down in the water where it's not going to freeze or pick up surface junk every night. It comes in 3 different sizes, is a simple and straight forward system, and is rugged and ready for trap line use. I think you will agree that anything that maes or keeps you versatile in trapping is a plus.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mix a tablespoon with dirt when making dirt hole type sets.
|
This dye is perfect for dying traps. Directions are on the front. Available in brown or black. 1 pound package.
Brown $3.95; black $11.95
**ONLY BLACK AVAILABLE**
|
This handy little tool can be used to preset your 330 and slip it off at the set. So nice and small. Just keep it in your pocket, and you don't even know it's there. Can be used at the set during remake, just slip it off when you have completed the set. When you're beaver trapping, things happen, if you know what I mean, and if this tool comes up missing, you're only out $1.00ish, not $15-$20 like some other safeties.
$4.00/half dozen; $7.95/dz
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The same great feel as the "super flex" glove, but has the knit wrist. A little tighter feel, and it keeps it from riding up your jacket.
|
The "super flex" fox glove is just that--a great rubber glove for the trapper who wants the most in scent control. Also has many other uses around the fur shed, and at a great price too!
|
When we were looking for a body grip support to handle and put on our website, we were amazed by the numerous supports available. With that being said, we wanted our trappers to be able to cover about any base with a removable body grip support, plus make it affordable. This support is so very unique that your trap can be set in the usual upright position, or you can keep that trigger system down in the water where it's not going to freeze or pick up surface junk every night. It comes in 3 different sizes, is a simple and straight forward system, and is rugged and ready for trap line use. I think you will agree that anything that maes or keeps you versatile in trapping is a plus.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is not your average, cheap, metal tail stripper. After being unhappy with the cheap foreign made, stamped out edges that you could also use as a knife to skin with, we took the metal tail stripper to the laser cutter and had them make it right! No sharp edges on this stripper, and you get what you pay for: a tail stripper not a knife to cut your hand. Made in the U.S.A.
|
A binder, blender, stabilizer, and antifreeze; can also be mixed with urine to help prevent evaporation.
Pint $5.00 1/2 gallon $10.00; $18.00 gallon
|
Package of 24 write your own trap tags. Comes with everything you need.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pressed fish oil. Low fat content. Resist gelling in cold temperatures. Thick, golden color. Great to mix with your favorite smell and a fabulous lure base. Color may vary from picture.
|
Also known as bait makers compound. Use 2 tablespoons per pint or 1 cup per gallon to preserve fresh or aged meat or fish. Remember it takes about 7 days for this to take full effect.
|
Widely used as a tincturing base, and some lure makers use it in place of Glycerine. When you are using this as an anti-freeze in your dirt trapping, mix 1 part glycol with 3 parts water, and spray it in layers as you construct your set.
Pint $7.50; 1/2 gallon $15.95; gallon $26.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We have these handy little connectors in 2 popular sizes. The first is the standard size, and is perfect for the mink/coon/muskrat line. Use this connector to wrap around just about anything without tools. connects two cables, two chains, a drag, drag and chain to your main chain, snare and extension cable, chain to a tie plate, or anywhere you want to connect.
|
Large kneeling pad to take along on the trapline.
|
High quality urine is absolutely a trappers best friend, and this is some of the best money can buy! Pure, uncut urine- professionally handled to ensure a top of the line product to the trapper.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This stand is pretty straight forward, easy to use, and does the job it's meant to do. When I go into a new beaver flow for the first time, I am going to pack a 330, and bring this support. It can go anywhere, deep or shallow, on a trail, or wherever needed. It's super versatile, and our stand, unlike any other on the market, comes with an attached TOP LATCH SYSTEM. Yes, no more wiring or looking for something to hold the top together. Just clip it on, and away you go. 48" length.
**an additional $14 shipping will be added to this item due to its size/shape; if ordering more than one, please call so that we can combine shipping. Otherwise, you will be charged $14 per support, unless ordering by the 1/2 dozen or dozen.
|
We have these handy little toggles in 2 popular sizes. The first is the standard size, and is perfect for the mink/coon/muskrat line. Use this connector to wrap around just about anything without tools. connects two cables, two chains, a drag, drag and chain to your main chain, snare and extension cable, chain to a tie plate, or anywhere you want to connect.
|
After the price increase on crystal powder, we started looking for another way for the trapper that doesn't require dips. We found that the crystal dye is a product of the clothing dye so they sky rocketed the price. After contacting them, we were able to purchase the same dye, just in a liquid form, and at the same price we had been paying for years. I've been using this myself for 2 years, and have had absolutely no problems. It is concentrated so the 8 oz. jar will do 4-5 dozen traps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is the pan cover that I am currently using. It is a waxed paper type pan cover. Just take 15-20 at a time and cut them to fit whatever size trap you use. Scent free and very economical. At 1000 papers per pack, they go a LONG way. 5x5 1/2". 1000/pack.
|
Fresh meat base predator bait by Joe McCarl. 8 oz.
|
|
|
