|
|
|
|
|
|
|
|
|
|
|
|
|
|
Orange, plastic tail stripper.
|
Easily holds a dozen fox pelts, or about 15 coons on a hanger. Just a great way to keep your fur up and out of the way after being removed from the stretcher.
|
This is not your average, cheap, metal tail stripper. After being unhappy with the cheap foreign made, stamped out edges that you could also use as a knife to skin with, we took the metal tail stripper to the laser cutter and had them make it right! No sharp edges on this stripper, and you get what you pay for: a tail stripper not a knife to cut your hand. Made in the U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to split the tail down the tip after the bond has been removed. Very handy tool in the fur shed, and last a long time. Makes a tedious job very simple and quick.
|
|
Handles light fleshing, really works well on mink and muskrat. A long time staple in the fur shed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Any entry cut you want to make in just seconds. Entry cuts for case skinning, cutting down the tail, or down the belly of a beaver- the perfect knife for combining time savings and clean straight cuts! The blade lasts and lasts yet can be replaced inexpensively!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is for the easy home tanning of all game hides and fur skins for hunters and trappers. Tans deer either hair on to make a deer skin rug or mount, or hair off to make buckskin leather. Tans all fur skins: coyote, fox, raccoon, squirrel, rabbit, muskrat, beaver, etc. Also elk, moose, caribou, bear, even snakeskin. Produces a soft, supple, Indian style tan in 5-7 days. The bottle will tan one deer hide or two medium size fur skins. Elk, moose, caribou, and bear require 3-6 bottles.
8 oz. bottle
|
|
Aluminum push pins are great for fastening fox, otter, coon, etc. pelts to wooden stretchers. Can be used over and over. Box of 100. Imported. Moore brand is no longer available.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is an all-purpose knife for around the fur shed. The knife to grab when when you're covered with animal parts and need to make a cut. Easy to sharpen and will outlast most high dollar knives.
|
|
All new design! One handed skinning gambrel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This gambrel has been in use in our fur shed for years.
|
|
This is a handy fur shed tool. Once the tail is started around the base, just lay it into the "V" slot in the tool, give the handle a pull, and the tail is stripped. It's spring loaded for speed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Beaver Hoops are for those who want to conveniently stretch their beaver hides on metal hoops using the sharp pointed clips (included). Simply, open the hoop and lock in position approximately 2 - 3" larger than you think the stretched hide will be. Using the clips, pierce the very edge of the hide with one end of the clip and then pull it back and hook it over the steel form of the hoop. You continue this until a clip is approximately every inch for the entire circumference of the beaver hide. Beaver hoops allow your hides to dry faster, as the air circulates on both sides of the hide, unlike boards.
**Due to oversize shape, an extra $20 will be charged for shipping**
|
These are available by the dozen in the following sizes:
#1 muskrat $37.95/dz
#4 raccoon $77.95/dz
#5 xl raccoon $94.95/dz
**due to weight and size an additional $10 will be added to shipping
|
Easily holds a dozen fox pelts, or about 15 coons on a hanger. Just a great way to keep your fur up and out of the way after being removed from the stretcher.
**DUE TO SIZE AND WEIGHT OF THIS ITEM AN ADDITIONAL $5.00 WILL BE ADDED FOR SHIPPING**
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
An original, handmade skinning gambrel made by Rowan Fay. Each authentic piece is numbered and signed. A treasure for sure!
|
Beaver Hoops are for those who want to conveniently stretch their beaver hides on metal hoops using the sharp pointed clips (included). Simply, open the hoop and lock in position approximately 2 - 3" larger than you think the stretched hide will be. Using the clips, pierce the very edge of the hide with one end of the clip and then pull it back and hook it over the steel form of the hoop. You continue this until a clip is approximately every inch for the entire circumference of the beaver hide. Beaver hoops allow your hides to dry faster, as the air circulates on both sides of the hide, unlike boards.
**Due to oversize shape, an extra $20 will be charged for shipping**
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Compact Skinner will let every trapper be able to set up a skinning machine whenever needed. The bottom plate/D-ring assembly measures 7x5, which allows you endless adjustment for chain length, and also lets you pull to the floor. The kit also comes with 2-6 inch wide flat mouth grip locking pliers by CH Hansen welded to 48 inches of #3 USA machine chain, and the Bricker 100 skinning gambrel. The complete set to skin; all you need is a hoist. Compact, but ready to skin whatever you throw at it. Great for out of state trips, low overhead areas, and everyday skinner.
|
Beaver Hoops are for those who want to conveniently stretch their beaver hides on metal hoops using the sharp pointed clips (included). Simply, open the hoop and lock in position approximately 2 - 3" larger than you think the stretched hide will be. Using the clips, pierce the very edge of the hide with one end of the clip and then pull it back and hook it over the steel form of the hoop. You continue this until a clip is approximately every inch for the entire circumference of the beaver hide. Beaver hoops allow your hides to dry faster, as the air circulates on both sides of the hide, unlike boards.
**Due to oversize shape, an extra $20 will be charged for shipping**
|
|
|
